184072/4065- 85 GBEdition 07.2010replaces 7.2000Operating InstructionLAAPulling Device123431 Hydraulic cylinder HOP2 Pulling rope3 Rail attachment4 Ho
2Safety instructions1000 Basic operation and designated use of the machine1100The machine has been built in accordance with state-of-the-art standard
33200Before starting up or setting the machine in motion and during operation of the machine makesure that nobody is at risk.3300Before setting the ma
46000 Intended useThe LUKAS Pulling Device serves for pulling rolling stock in or opposite to their driving direction.Furthermore run-up rail vehicles
5Move the arresting lever backwards until it latches in the end position.8400Insert the pulling rope into the pulling cylinder and push it through unt
68700 Put the rail attachment on top of the rails as shown in figure 4.Observe that the rail attachments ar not identical, i. e. there is a "left
710400 When the pulling cylinder is fully extended, you can continue with pulling without any manualresetting: switch the control valve to "lower
8Pulling_device_BA_GB_84072406585_0710.p65© Copyright 2010 LUKAS Hydraulik GmbHLUKAS Hydraulik GmbHA Unit of IDEX CorporationWeinstraße 39, 91058 Erla
Comments to this Manuals