Lukas CU 4DVV User Manual

1490000085 ENControl tables CU 2DV and CU 4DVV(Translation of the original instruction manual)Instruction Manual Rerailing EquipmentEdition 09.2014149

10 4.3 Installation of the control table4536921587 1 Control lever - lifting/lowering 1a Control lever black - traversing cylinder1b Control lev

11 4.4 Functions and controls available at the control deskRed switching lever for anchoring cylinder (holds the traversing unit),alternatively LIFTI

12Controlling double-acting hydraulic equipmentThe double-acting hydraulic equipment is actuated by 4 or 8 (on the CU 4DW) control levers on the drive

135. Erection and start-upThe control tables must be set up at a suffi ciently safe distance from the loads to be lifted or moved.Both the load and the

14The support frame ensures secure mounting of the control unit and allows to operator to work standing upright.The control unit is delivered in the f

15On the double-acting hydraulically-actuated working equipment, there is, on the pressure supply side (with cylinders: the cylinder base side) a quic

166. Dismantling the equipment / deactivation following operationA visual inspection must be carried out after every use, but at least once a year. E

17Inspections to be carried out:Visual Inspection• Control table free from damage and deformation• General tightness (leaks),• Handle present and s

18 7.2 Repairs7.2.1 Coupling replacementThe couplings must be replaced if:- there is external damage,- the locking does not function,- hydraulic fl u

198. TroubleshootingFault Check Cause SolutionConnected working equipment moves slowly or jerkily when activatedAre the hoses connected properly?Air i

2

20Contact an authorised LUKAS dealer or the LUKAS Customer Service Department directly if the malfunctions cannot be rectifi ed.The address for the LUK

21Because all values are subject to tolerances, there may be small differences between the data for your device and the data in the following tables!9

22 9.3 Operating and storage temperature ranges 9.2 Control unit CU 4 DVVDevice type CU 4DVV Value Units RemarksItem number 70-20-20Dimensions l x

2310. EC Declaration of Conformity

2411. Notes

25

26

27

LUKAS Hydraulik GmbHA unit of the IDEX CorporationWeinstrasse 39, D-91058 Erlangen, GermanyTel.: (+49) 0 91 31 / 698 - 0Fax.: (+49) 0 91 31 / 698 -

3 Content Page1. Danger classifi cations 42. Product safety 53. Proper use 84. Components and functions 9 4.1 Description 9 4.2 Hydraulic sup

4 Wear a helmet with a face guard Wear protective gloves Wear safety shoes Proper recycling Protect the environment Read and follow the operati

52. Product safetyLUKAS products are developed and manufactured to ensure the best performance and quality when used as intended.The safety of the ope

6In the event of malfunctions, immediately deactivate the equipment and secure it. Repair the fault immediately.Do not carry out any changes (addition

7In addition to the safety instructions in this operating manual, all generally applicable, statutory and otherwise binding national and international

83. Proper useLUKAS control tables are especially designed for rerailing technology. They serve to control the deployed hydraulic lifting and traversi

94. Components and functions 4.1 DescriptionThe CU range of control tables consist of a control desk with support frame and a large number of valves.