Lukas HTS 90 User Manual

84150/6133-85 GBIssue 5.96Operating InstructionsRescue ToolsRescue Sets with ZPH 1/0,5HTS 90; LSH - 31 Hand pump, Typ ZPH 1/0,5 PN 7001.1 Lever1.2 Han

1 Basic operation and designated use of the machine1.1 The machine has been built in accordance with state-of-the-art standards and the recognizedsafe

3.2 Before starting up or setting the machine in motion and during operation of the machinemake sure that nobody is at risk.3.3 Before transporting

5 Safety Instructions for Hydraulic hoses(HR 1495 35 219)6 Application6.1 GeneralThe hand pump ZHP 1/0,5 is designed as a two-stage pump which is use

7.3 Venting the Working toolUse the pump to drive out the unloaded piston half way. The pump has to be placed higherthan the tool which has to be vent

10.4.2 Cutter set LSH - 3Attention! Do not reach in between the cutter arms!Live cables must not be cut apart.Cutting objects under tension (shock

13 TroubleshootingIf the defects cannot be repaired, contact an authorised LUKAS dealer or the LUKAS servicedepartment. The address:LUKAS Hydraulik Gm

Recommended viscosity range: 10 ... 200 mm²/s, delivered with HLP 10 to DIN 51 52414.1 Oil recommendationsFor LUKAS hydraulic devices, use mineral oil