Lukas LKE 55 User Manual download pdf (Page 13)

If the capacity of the installed accu constantly decreases despite proper charging, it must be

replaced by a qualified person.

Maintenance advice

Apply oil to the metal surfaces of the device from time to time except the electrical contacts.

13.1 Oil for LUKAS hydraulic devices

Mineral oil in accordance with DIN 51524

HLP 10, recommended range of viscosity: 10..200 (mm

/s).

14 Troubleshooting

Additional documentation:

LKE 50 : Spare parts list 84150/7010; service manual 84150/7010-84.

LKE 51: Spare parts list 84150/7040; service manual 84150/7010-84.

LKE 55: Spare parts list 84150/7060.

LKE 70: Spare parts list 84150/7025.

If the defects cannot be repaired, contact an authorized LUKAS dealer or the LUKAS service

department. The address: LUKAS Hydraulik GmbH, Weinstraße 39, 91058 Erlangen, Germany;

P.O. Box 2560, 91013 Erlangen Germany; Service-phone.: +49 / 91 31 / 6 98 - 3 38;

Fax: +49 / 91 31 / 69 83 53.

Trouble Remedy Carried out by

Blade arms cannot be closed completely Refill oil

LKE 50 / 51 / 70

Authorized

The LKE's effective operating time insert new accu

service garage

between the individual charging cycles LKE 55

decreases steadily despite proper charging use new changeable User

accu

The material to be cut slides between the blade Tighten User

arms during the cutting procedure central bolt (7) (see item 15.2)

Device does not reach pressure

Trouble shooting by service garage

Motor cannot be started

1 2 ... 8 9 10 11 12 13 14 15

No comments

Lukas LKE 55 User Manual Page 13