Lukas LKE 55 User Manual download pdf (Page 4)

1 Basic operation and designated use of the machine

1.1 The machine has been built in accordance with state-of-the-art standards and the recognized

safety rules. Nevertheless, its use may constitute a risk to life and limb of the user or of third parties,

or cause damage to the machine and to other material property.

1.2 The machine must only be used in technically perfect condition in accordance with its

designated use and the instructions set out in the operating manual, and only by safety-conscious

persons who are fully aware of the risks involved in operating the machine. Any functional disorders,

especially those affecting the safety of the machine/plant, should therefore be rectified immediately.

1.3 The machine is exclusively designed for the application mentioned in the operating instruc-

tions. Using the machine for purposes other than those mentioned above is considered contrary

to its designated use. The manufacturer/supplier cannot be held liable for any damage resulting

from such use. The risk of such misuse lies entirely with the user.

Operating the machine within the limits of its designated use also involves observing the

instructions set out in the operating manual and complying with the inspection and maintenance

directives.

2 Organizational measures

2.1 The operating instructions must always be to hand at the place of use of the machine.

2.2 In addition to the operating instructions, observe and instruct the user in all other generally

applicable legal and other mandatory regulations relevant to accident prevention and environmental

protection.

This also applies for wearing protective clothing, helmet with visor or goggles and protective gloves.

2.3 In order to avoid injuries, the machine must only be operated by a specially trained operator

who has undergone a safety training.

2.4 Observe all safety instructions and warnings attached to the machine.

Make sure that safety instructions and warnings attached to the machine are always complete and

perfectly legible.

2.5 Never make any modifications, additions or conversions which might affect safety without the

supplier’s approval. This also applies to the installation and adjustment of safety devices and

valves.

2.6 Spare parts must comply with the technical requirements specified by the manufacturer. This

is guaranteed from spare parts from original equipment manufacturers. It is only allowed to use

original LUKAS spare parts or LUKAS system components.

2.7 Adhere to prescribed intervals or those specified in the operating instructions for routine

checks and inspections.

2.8 Make sure to dispose properly of packing material and any removed parts!

3 General safety instructions

3.1 In the event of malfunctions, stop the machine immediately and lock it. Have any defects

rectified immediately.

1 2 3 4 5 6 7 8 9 ... 14 15

No comments

Lukas LKE 55 User Manual Page 4